low noise amplifiers - smt 5 5 - 324 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com HMC717LP3 / 717lp3e gaas phemt mmic low noise amplifier, 4.8 - 6.0 ghz v01.1008 general description features functional diagram the HMC717LP3(e) is a gaas phemt mmic low noise ampli er that is ideal for xed wireless and lte/wimax/4g basestation front-end receivers operating between 4.8 and 6.0 ghz. the ampli er has been optimized to provide 1.1 db noise gure, 16.5 db gain and +31.5 dbm output ip3 from a single supply of +5v. input and output return losses are excellent and the lna requires minimal external matching and bias decoupling components. the HMC717LP3(e) can be biased with +3v to +5v and features an externally adjustable supply current which allows the designer to tailor the linearity performance of the lna for each application. noise figure: 1.1 db gain: 16.5 db output ip3: +31.5 dbm single supply: +3v to +5v 16 lead 3x3mm qfn package: 9 mm 2 typical applications the HMC717LP3(e) is ideal for: ? fixed wireless and lte/wimax/4g ? bts & infrastructure ? repeaters and femtocells ? public safety radio ? access points electrical speci cations t a = +25 c, rbias = 2k ohms for vdd = 5v, rbias = 20k ohms for vdd = 3v [1] [2] parameter vdd = +3v vdd = +5v units min. typ. max. min. typ. max. frequency range 4.8 - 6.0 4.8 - 6.0 mhz gain 12 14.3 13.5 16.5 db gain variation over temperature 0.01 0.01 db/ c noise figure 1.25 1.5 1.1 1.4 db input return loss 13 13 db output return loss 13 18 db output power for 1 db compression (p1db) 12 14 15 18.5 dbm saturated output power (psat) 15 19.5 dbm output third order intercept (ip3) 25.5 31.5 dbm total supply current (idd) 31 40 73 100 ma [1] rbias resistor sets current, see application circuit herein [2] vdd = vdd1 = vdd2
low noise amplifiers - smt 5 5 - 325 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com input return loss vs. temperature [1] output return loss vs. temperature [1] broadband gain & return loss [1] [2] -30 -25 -20 -15 -10 -5 0 5 10 15 20 25 12 34 56 78 910 vdd=5v vdd=3v frequency (ghz) response (db) s11 s21 s22 -20 -15 -10 -5 0 4.5 4.9 5.3 5.7 6.1 6.5 +25c +85c -40c frequency (ghz) return loss (db) -25 -20 -15 -10 -5 0 4.5 4.9 5.3 5.7 6.1 6.5 +25c +85c -40c frequency (ghz) return loss (db) HMC717LP3 / 717lp3e v01.1008 gaas phemt mmic low noise amplifier, 4.8 - 6.0 ghz [1] vdd = 5v, rbias = 2k [2] vdd = 3v, rbias = 20k gain vs. temperature [2] 5 9 13 17 21 25 4.5 4.9 5.3 5.7 6.1 6.5 +25c +85c -40c frequency (ghz) gain (db) gain vs. temperature [1] 5 9 13 17 21 25 4.5 4.9 5.3 5.7 6.1 6.5 +25c +85c -40c frequency (ghz) gain (db) reverse isolation vs. temperature [1] -50 -45 -40 -35 -30 -25 -20 4.5 4.9 5.3 5.7 6.1 6.5 +25c +85c -40c frequency (ghz) isolation (db)
low noise amplifiers - smt 5 5 - 326 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com p1db vs. temperature [1] [2] psat vs. temperature [1] [2] 8 10 12 14 16 18 20 22 24 4.5 4.9 5.3 5.7 6.1 6.5 +25c +85c -40c frequency (ghz) psat (dbm) vdd=5v vdd=3v 8 10 12 14 16 18 20 22 24 4.5 4.9 5.3 5.7 6.1 6.5 +25c +85c -40c frequency (ghz) p1db (dbm) vdd=5v vdd=3v HMC717LP3 / 717lp3e v01.1008 gaas phemt mmic low noise amplifier, 4.8 - 6.0 ghz output ip3 and total supply current vs. supply voltage @ 4800 mhz [3] [1] vdd = 5v, rbias = 2k [2] vdd = 3v, rbias = 20k [3] rbias = 2k for vdd = 5v, rbias = 20k for vdd = 3v [4] measurement reference plane shown on evaluation pcb drawing. output ip3 vs. temperature [1] [2] 16 19 22 25 28 31 34 37 40 4.5 4.9 5.3 5.7 6.1 6.5 +25c +85c -40c frequency (ghz) ip3 (dbm) vdd=5v vdd=3v 24 26 28 30 32 34 36 5 20 35 50 65 80 95 2.7 3.1 3.5 3.9 4.3 4.7 5.1 5.5 ip3 (dbm) idd (ma) voltage supply (v) idd ip3 noise figure vs. temperature [1] [2] [4] 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 4.5 4.9 5.3 5.7 6.1 6.5 vdd=5v vdd=3v frequency (ghz) noise figure (db) +85c +25c -40c output ip3 and total supply current vs. supply voltage @ 5900 mhz [3] 24 26 28 30 32 34 36 5 20 35 50 65 80 95 2.7 3.1 3.5 3.9 4.3 4.7 5.1 5.5 ip3 (dbm) idd (ma) voltage supply (v) idd ip3
low noise amplifiers - smt 5 5 - 327 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com power compression @ 5900 mhz [1] -10 -5 0 5 10 15 20 25 -20 -16 -12 -8 -4 0 4 8 pout gain pae input power (dbm) pout (dbm), gain (db), pae (%) HMC717LP3 / 717lp3e v01.1008 gaas phemt mmic low noise amplifier, 4.8 - 6.0 ghz -10 -5 0 5 10 15 20 25 -20 -15 -10 -5 0 5 pout gain pae input power (dbm) pout (dbm), gain (db), pae (%) power compression @ 5900 mhz [2] power compression @ 4800 mhz [1] -10 -5 0 5 10 15 20 25 -20 -15 -10 -5 0 5 pout gain pae input power (dbm) pout (dbm), gain (db), pae (%) -10 -5 0 5 10 15 20 25 -20 -17 -14 -11 -8 -5 -2 1 4 pout gain pae input power (dbm) pout (dbm), gain (db), pae (%) power compression @ 4800 mhz [2] [1] vdd = 5v, rbias = 2k [2] vdd = 3v, rbias = 20k [3] rbias = 2k for vdd = 5v, rbias = 20k for vdd = 3v gain, power & noise figure vs. supply voltage @ 4800 mhz [3] 8 10 12 14 16 18 20 22 0.9 1 1.1 1.2 1.3 1.4 1.5 1.6 2.7 3.1 3.5 3.9 4.3 4.7 5.1 5.5 p1db gain nf gain (db) & p1db (dbm) noise figure (db) voltage supply (v) gain, power & noise figure vs. supply voltage @ 5900 mhz [3] 10 12 14 16 18 20 22 1 1.1 1.2 1.3 1.4 1.5 1.6 2.7 3.1 3.5 3.9 4.3 4.7 5.1 5.5 p1db gain nf gain (db) & p1db (dbm) noise figure (db) voltage supply (v)
low noise amplifiers - smt 5 5 - 328 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com HMC717LP3 / 717lp3e v01.1008 gaas phemt mmic low noise amplifier, 4.8 - 6.0 ghz output ip3 vs. rbias @ 5900 mhz 20 23 26 29 32 35 100 1000 10000 100000 vdd=3v vdd=5v rbias (ohms) ip3 (dbm) gain, noise figure & rbias @ 5900 mhz output ip3 vs. rbias @ 4800 mhz 20 22 24 26 28 30 32 100 1000 10000 100000 vdd=3v vdd=5v rbias (ohms) ip3 (dbm) gain, noise figure & rbias @ 4800 mhz 6 8 10 12 14 16 18 1.1 1.2 1.3 1.4 1.5 1.6 1.7 100 1000 10000 100000 vdd=3v vdd=5v gain (db) noise figure (db) rbias (ohms) 2 5 8 11 14 17 20 1 1.2 1.4 1.6 1.8 2 2.2 100 1000 10000 100000 vdd=3v vdd=5v gain (db) noise figure (db) rbias (ohms)
low noise amplifiers - smt 5 5 - 329 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com absolute maximum ratings drain bias voltage (vdd) +5.5v rf input power (rfin) (vdd = +5 vdc) +10 dbm channel temperature 150 c continuous pdiss (t= 85 c) (derate 7.73 mw/c above 85 c) 0.5 w thermal resistance (channel to ground paddle) 129.5 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c electrostatic sensitive device observe handling precautions vdd (v) idd (ma) 2.7 23 3.0 31 3.3 39 4.5 60 5.0 73 5.5 85 note: ampli er will operate over full voltage ranges shown above. typical supply current vs. supply voltage (rbias = 2k for vdd = 5v, rbias = 20k for vdd = 3v) vdd (v) rbias (ohms) idd (ma) min max recommended 3v 2k [1] open circuit 2k 20 4.7k 26 20k 31 5v 150 [2] open circuit 261 50 1k 65 2k 73 [1] with vdd= 3v and rbias < 2k may result in the part becoming conditionally stable which is not recommended. [2] with vdd = 5v and rbias<150 may result in the part becoming conditionally stable which is not recommended. absolute bias resistor range & recommended bias resistor values HMC717LP3 / 717lp3e v01.1008 gaas phemt mmic low noise amplifier, 4.8 - 6.0 ghz
low noise amplifiers - smt 5 5 - 330 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com outline drawing part number package body material lead finish msl rating package marking [3] HMC717LP3 low stress injection molded plastic sn/pb solder msl1 [1] 717 xxxx HMC717LP3e rohs-compliant low stress injection molded plastic 100% matte sn msl1 [2] 717 xxxx [1] max peak re ow temperature of 235 c [2] max peak re ow temperature of 260 c [3] 4-digit lot number xxxx notes: 1. leadframe material: copper alloy 2. dimensions are in inches [millimeters] 3. lead spacing tolerance is non-cumulative 4. pad burr length shall be 0.15mm maximum. pad burr height shall be 0.05mm maximum. 5. package warp shall not exceed 0.05mm. 6. all ground leads and ground paddle must be soldered to pcb rf ground. 7. refer to hittite application note for suggested land pattern. package information HMC717LP3 / 717lp3e v01.1008 gaas phemt mmic low noise amplifier, 4.8 - 6.0 ghz
low noise amplifiers - smt 5 5 - 331 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com pin number function description interface schematic 1, 3 - 7, 9, 10, 12, 14, 16 n/c no connection required. these pins may be connected to rf/dc ground without affecting performance. 2 rfin this pin is dc coupled see the application circuit for off-chip component. 8 bias this pin is used to set the dc current of the ampli er by selection of the external bias resistor. see application circuit. 11 rfout this pin is ac coupled and matched to 50 ohms 13, 15 vdd2, vdd1 power supply voltage. bypass capacitors are required. see application circuit. gnd package bottom must be connected to rf/dc ground pin descriptions HMC717LP3 / 717lp3e v01.1008 gaas phemt mmic low noise amplifier, 4.8 - 6.0 ghz
low noise amplifiers - smt 5 5 - 332 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application circuit HMC717LP3 / 717lp3e v01.1008 gaas phemt mmic low noise amplifier, 4.8 - 6.0 ghz
low noise amplifiers - smt 5 5 - 333 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com evaluation pcb item description j1, j2 pcb mount sma connector j3 - j5 dc pins c1 10 nf capacitor, 0402 pkg. c2, c4 1000 pf capacitor, 0603 pkg. c3, c5 100 pf capacitor, 0603 pkg. c6 1.2 pf capacitor, 0402 pkg. r1 2k ohm resistor, 0402 pkg. (rbias) r2, r3 0 ohm resistor, 0402 pkg. u1 HMC717LP3(e) ampli er pcb [2] 120586 evaluation pcb [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350. list of material for evaluation pcb 122416 [1] the circuit board used in this application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation board should be mounted to an appro- priate heat sink. the evaluation circuit board shown is available from hittite upon request. HMC717LP3 / 717lp3e v01.1008 gaas phemt mmic low noise amplifier, 4.8 - 6.0 ghz
|
